The Spy Plane is a great outdoor paper airplane that can stay in the air for some time if you throw it high enough. This makes it a great outdoor plane.
Step 1: Start with a regular piece of rectangle paper that’s 8.5 x 11.0 inches (215.9 x 279.4 mm).
Step 2: Fold the paper in half.
Step 3: Unfold.
Step 4: Fold up about one inch (25.4mm) of the bottom.
Step 5: Continue folding up the bottom six more times for a total of seven times.
Step 6: Rotate the paper so that the folded parts are on top.
Step 7: Turn the paper over.
Step 8: Fold the left half over to the right.
Step 9: Make a crease about one inch (25.4mm) from the left, then fold the right side over to the left. This is the wing.
Step 10: Turn the paper over.
Step 11: Now fold the left side over to the right to line up with the other wing.
Step 12: Fold in about a thumb’s width of the edge of the wing. This will be the wing’s fin.
Step 13: Turn the paper over.
Step 14: Now fold the fin for this wing as well. Make sure to line up with the other fin.
Step 15: Unfold the plane. Now you’re ready to fly it!
Step 16: Unfold the plane until the wings are tilted up a bit and the fins are straight up.
Step 17: Hold the front part of the plane and throw it straight up or at an angle. Don’t be afraid to throw it hard. The higher you throw it, the longer it stays in the air!
Click on “Like” below if you like the Spy Plane!